plastic raw material product line

Lower Cost, not lower quality Standard "no hassle" configurations available Fully customizable for different materials

We will offer you the opitimum solution for you pellets product line .We have both polymer process engineer and mechanical engineer ,they good at on design the machine for your formula and efficency products requirement.

for example :

Before you order the machine , we would like to confirm the basic parameters from you . If you need we would love to give you our best suggest to you , and work with you together for choose the perfect machine to match you goal .

1. Model type : We have both wagon head and cantilever type , and depand on you output requirement .

2.Strands : How many strands from your extruder

3. Material: What kind of material you manufacture

4. Pellet size : The diameter and the length of your pellets need

5. Linear speed : We will offer you adjustment on the linear speed , but we still need a normal range of your product line

6. Maximum expected output : We can calculate the output , it is based on the material's density , diameter of pellets ,strands number ,and the linear speed .

7.Cutting material : The parts inside of cutting chamber are all stainless steel or alumunium ,make sure no rusting .

8. Rotor's matrial : Normally we will offer you stainless steel sinter tungsten carbide steel , good at most of most material soft or hard . If need we would like working with you to choose the other kind of rotor material .

9. Feed roller (bottom) and feed roller (upper) : Those two base on the product need to be manufactory, we will work with you to fingure it out .

10 . Feed roller (upper control) : We would like offer the pnuematic control if you don't have some special requirement .

11. Drive motor : We have four type for you to choose 1).Single drive single pull 2). Single drive dual pull 3). Dual drive single pull 4). Dual drive dual pull

12. Speed control : Frequency converter if customer don't have any special requirement , it is precisely control and have a wide range to adjust .

We expect we have chance to work together on a product , and work out a opitmum solution for you .

 Both Cantilever and Wagon-head styles are available from 5 kg/hr to 300 kg/hr.  please see the table below for usage recommendations

Key Benefits

Lower Cost, not lower qualityStandard "no hassle" configurations available!Fully customizable for different materials if required.Shipment times from supplier usually less than 4 weeks!

Model	Motor power(KW)	Speed adjustment	Strands	Max. linear speed(m/min)	Strads' type	Max. output (kg/hr)	Rotor type	Tooth of rotor
KLQ-25	0.75	Frequency converter	<3	72	Φ3×3	40	Φ90×50	14
KLQ-60	1.1-1.5	frequency converter	<8	72	Φ3×3	60	Φ90×70	14
KLQ-100	2.2	frequency converter	<8	90	Φ3×3	100	Φ120×96	14
KLQ-300	4	frequency converter	<18	96	Φ3×3	300	Φ100×150	24
KLQ-500	5.5-7.5	frequency converter	<30	96	Φ3×3	500	Φ200×200	32
KLQ-800	11	frequency converter	<40	96	Φ3×3	800	Φ200×250	32
KLQ-900	11-15	frequency converter	≤ 40	96	Φ3×3	900	Φ200×300	32
KLQ-2000	15-22	frequency converter	<60	96	Φ3×3	2000	Φ200×400	32

plastic raw material product line